LTPC/CAPC Series

(with cutter)

LTPC Series and CAPC Series with auto-cutter are innovative 2″ direct thermal printer mechanisms designed for portable printing applications. Both series are available with the PT800P01 processor, supporting Parallel and Serial interface connectivity.

  • Low operating voltage for longer battery life
  • Choice of 6 dots/mm or 8 dots/mm resolution
  • EZ-OP clamshell paper replacement

CAPC Series Specifications

Model CAPC235 CAPC245
Printing Method Thermal line dot printing
Number of dots/line 288
Resolution (dots/mm) 6
Paper width (mm) 58
Printing width (mm) 48
Max speed (mm/sec) 60
Paper path Curved
Head temperature By thermistor
Platen position detection By mechanical switch
Detection Out of paper detection By photo interrupter
Cutter home position By mechanical switch
Power supply (V) Operating voltage (Vdd) 4.75 to 5.25
Operating voltage (Vp) 5.8 to 8.0
Peak current (A) Head 4.6 (8V/144 dots) 4.3 (8V/96 dots)
Motor .82 (8V)
Cutter 2.2
Cutting Method Slide type
Paper thickness 54 to 80
Cutting type Partial cut (Right side edge remains)
Operating time (max sec/cycle) 1
Min cutting pitch (mm) 10
Cut frequency (max cuts/min) 30
Service life Pulse activation 50 million 100 million
Abrasion resistance (km) 50*
Life (cuts) 500,000
Operating temperature (°C) -20 to 50
Dimensions (WxDxH mm) 71.1 x 88.6 x 29.0**
Mass (g) Approx. 220

LTPC Series Specifications

Model LTPC235 LTPC245
Printing Method Thermal line dot printing
Number of dots/line 288
Resolution (dots/mm) 6
Paper width (mm) 58
Printing width (mm) 48
Max speed (mm/sec) 60
Paper path Curved
Head temperature By thermistor
Platen position detection By mechanical switch
Detection Out of paper detection By photo interrupter
Cutter home position By mechanical switch
Power supply (V) Operating voltage (Vdd) 4.75 to 5.25
Operating voltage (Vp) 5.8 to 8.0
Peak current (A) Head 4.6 (8V/144 dots) 4.3 (8V/96 dots)
Motor .82 (8V)
Cutter
Cutting Method
Paper thickness
Cutting type
Operating time (max sec/cycle)
Min cutting pitch (mm)
Cut frequency (max cuts/min)
Service life Pulse activation 50 million 100 million
Abrasion resistance (km) 50*
Life (cuts)
Operating temperature (°C) -20 to 50
Dimensions (WxDxH mm) 71.1 x 88.6 x 29.0**
Mass (g) Approx. 220

CPU

Model PT800P01
Thermal printer CAPC235/LTPC235 CAPC245/LTPC245
Package form 80 pin QFP
Operating voltage (V) Vp: 5.0 to 8.0, Vcc: 4.5 to 5.5
Operating frequency (MHz) 5 + .5%
Configuration C-MOS LSI
Interface Parallel, Serial
Character type Extended graphics character set, Other characters are available with CGs *1 or external ROM
Character matrix (H x W dots) 16 dot characters : 16 x 8, 16 x 16
24 dots characters : 24 x 12, 24 x 24
Dimensions (W x D x H mm) 17.2 x 17.2 x 1.7
* Use recommended thermal paper
** Excluding protrusion
Stay informed, follow SII on Twitter